This is an old revision of the document!

Dell EMC SmartFabric

Connect to a switch using ssh.

Paged output	Expand by one line	`Return`
	Expand by one screen (25 lines?)	`Space`
	Cancel paging	`Q`
Help and completion	Complete a prompt	`Tab`
Help and completion	Show all possible commands and subcommands	`?`

Frequently Used Commands

Mode			Effect	Example
Main			Show complete config	`show running-config`
			Show VLAN setup	`show vlan`
			Enter config mode	`conf t`
Config			Change settings for this interface	e.g. `int vlan 23` `int gigabit 1/23` This will put you in the interface config mode
	Interface Config	VLAN	Add ports to VLAN	`untagged Gi 1/38` or `tagged Gi 1/38`
		VLAN	Remove ports from VLAN	`no untagged Gi 1/38` or `no tagged Gi 1/38`
		Port	Shutdown port (sometimes necessary for further configuration)	`shutdown`
			Reset port config	`no portmode hybrid` `no switchport` `shutdown` Refer to `show running-config` to see all the options on a port!
			Allow port to use tagged VLANs	`portmode hybrid` `switchport` `no shutdown` Then, continue to edit the VLANs and add the port
			Exit interface config mode	`exit`
			End config mode	`end`
Main			Make persistent/write config	`wr` `copy running-config startup-config`