Wolfs KB

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Dell EMC SmartFabric ======

Connect to a switch using ''ssh''.



===== Navigation =====
^ Paged output | Expand by one line | <key>Return</key> |
^ ::: | Expand by one screen (25 lines?) | <key>Space</key> |
^ ::: | Cancel paging | <key>q</key> |
^ Help and completion | Complete a prompt | <key>Tab</key> |
^ ::: | Show all possible commands and subcommands | <key>?</key> |

===== Frequently Used Commands =====
==== Sonic OS ====
^ Main ^^| Enter SONIC CLI | ''sonic-cli'' |
^ VLAN ^^| Add untagged (Trunk) VLAN to port | ''switchport trunk allowed VLAN add 40'' |
| ::: | ::: | ::: | Remove untagged (Trunk) VLAN from port | ''switchport trunk allowed VLAN remove 40'' |
| ::: | ::: | ::: | Set tagged VLAN for port | ''switchport access vlan 40'' |
| ::: | ::: | ::: | Remove tagged VLAN | ''no switchport access vlan'' |

==== OS9 ====
^ Mode ^^^ Effect ^ Example ^
^ Main ^^| Show complete config | ''show running-config'' |
| ::: | ::: | ::: | Show VLAN setup | ''show vlan'' |
| ::: | ::: | ::: | Enter config mode | ''conf t'' |
^ Config  | || Change settings for this interface | //e.g.// \\ ''int vlan 23'' \\ ''int gigabit 1/23'' \\ //This will put you in the interface config mode// |
| ::: ^ Interface Config  ^ VLAN                            | Add ports to VLAN                                                                                                                      | ''untagged Gi 1/38'' //or// \\ ''tagged Gi 1/38''                                                             |
| ::: | :::               ^ :::                             | Remove ports from VLAN                                                                                                                 | ''no untagged Gi 1/38'' //or// \\ ''no tagged Gi 1/38''                                                       |
| ::: | :::               ^ Port                            | Shutdown port \\ //(sometimes necessary for further configuration)//                                                                   | ''shutdown''                                                                                               |
| ::: | :::               ^ ::: | Reset port config               | ''no portmode hybrid'' \\ ''no switchport'' \\ ''shutdown'' \\ //Refer to ''show running-config'' to see all the options on a port!// |
| ::: | :::               ^ ::: | Allow port to use tagged VLANs  | ''portmode hybrid'' \\ ''switchport'' \\ ''no shutdown'' \\ //Then, continue to edit the VLANs and add the port// |
| ::: | ::: ^ ::: | Exit interface config mode | ''exit'' |
| ::: | || End config mode | ''end'' |
^ Main ^^| Make persistent/write config | ''wr'' \\ ''copy running-config startup-config'' |

===== Public Key Authentication =====
==== Authenticate with OS9 =====
<code bash>
conf t
ip ssh rsa-authentication enable
exit
start shell # (login as admin)
echo "$PUBKEY" > /f10/flash/id_rsa.pub
exit

ip ssh rsa-authentication my-authorized-keys flash://id_rsa.pub
wr</code>

==== Authenticate with OS10 ====
<code bash>
conf t
username admin sshkey "$PUBKEY"
ex
wr
</code>